Had to change out the lower standing rigging. That the wires on the side that helps hold the mast steady. The lower rigging isn't as high as the upper rigging. Duh...
Anyway, to put this lower rigging on I had to loosen the wire that helps hold the mast, then climb up the ladder and remove and replace the wire then tighten the wire back up. And it had to be done to both sides.
Thanks to Delane I was able to quickly add this part without further delay of the launch because of the mail.
I tied off the ladder to the mast with bungee cords then climbed up this ladder. Just kept remembering not to look down.